Correlation of cement performance property measurements with C3S/C2S ratio determined by solid state 29Si NMR measurements

The physicochemical and engineering performance properties of several API class G and H ordinary Portland cements (OPCs) from various foreign and domestic sources have been investigated in comparison with the tricalcium silicate/dicalcium silicate ratio (C3S/C2S) as determined by magic angle spinning (MAS) Si-29 nuclear magnetic resonance (NMR) experiments. XRF-derived oxide analysis appears to provide a lower C3S/C2S ratio than determined by NMR analysis. Furthermore, oxide analysis suggests that all the cements have a C3S/C2S ratio of 2-5, while our NMR method suggests the actual range is significantly broader. Determination of C3S/C2S ratios by NMR provides an effective method of analysis for cements, owing to NMR's direct measurement of the minerals in question. NMR C3S/C2S ratios demonstrate predictive ability for the determination of engineering performance properties. This is especially the case for prediction of strength development; in keeping with generally accepted understanding of cement hydration behavior, the strength development correlates with increasing C3S/C2S ratio, i.e., C3S content. The observed correlation between NMR-derived silicate ratio and strength development holds for cements in the presence of either a retarder (lignosulfonate) or a fluid loss additive (NN-dimethylformamide/2-acrylamido-2-methylpropanesulfonic acid copolymer). No significant correlation is observed between C3S/C2S ratio and the 72 h crush strength. The lack of dependency of either thickening time or Young's modulus to the C3S/C2S ratio as determined by MAS Si-29 NMR measurements suggests that these physical properties are independent of the relative silicate composition. No correlations are observed between any physical property and the silicate ratio derived from XRF data.