Related references
Note: Only part of the references are listed.Further investigation into a water flow rig related to calibration
Takashi Shimada et al.
FLOW MEASUREMENT AND INSTRUMENTATION (2010)
On the Spatial Averaging of Multiple Narrowband Electromagnetic Field Measurements: Methods and Uncertainty Estimation
Dimitrios I. Stratakis et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2010)
Uncertainty Evaluation Under Dynamic Conditions Using Polynomial Chaos Theory
Antonello Monti et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2010)
Uncertainty Evaluation in Two-Dimensional Indirect Measurement by Evidence and Probability Theories
Marco Pertile et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2010)
A Unified Framework for Uncertainty, Compatibility Analysis, and Data Fusion for Multi-Stereo 3-D Shape Estimation
Mariolino De Cecco et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2010)
Can coverage factor 2 be interpreted as an equivalent to 95% coverage level in uncertainty estimation? Two case studies
Martin Vilbaste et al.
MEASUREMENT (2010)
A new optimized uncertainty evaluation applied to the Monte-Carlo simulation in platinum resistance thermometer calibration
Kamran Shahanaghi et al.
MEASUREMENT (2010)
Traceability of mass measurements in Estonia
Viktor Vabson et al.
MEASUREMENT (2010)
Value of measurement information: A simple case study on grade change decisions
Heikki Jokinen et al.
MEASUREMENT (2010)
Correction and evaluation of the effect due to parasitic motion on primary accelerometer calibration
Akihiro Oota et al.
MEASUREMENT (2010)
Measurements of dimensional standards and etalons with feature size from tens of micrometres to millimetres by using sensor strengthened nanomeasuring machine
Xiaomei Chen et al.
MEASUREMENT (2010)
The effect of calibration equations on the uncertainty of UV-Vis spectrophotometric measurements
Kang-Hung Hsu et al.
MEASUREMENT (2010)
Derivation and comparison of fundamental uncertainty limits for laser-two-focus velocimetry, laser Doppler anemometry and Doppler global velocimetry
Andreas Fischer et al.
MEASUREMENT (2010)
Uncertainty analysis for measurement of measurand
Hung-Chia Chen et al.
MEASUREMENT (2010)
Importance of denoising in dielectric response measurements of transformer insulation: An uncertainty analysis based approach
Debangshu Dey et al.
MEASUREMENT (2010)
Comparising measuring methods of pitch diameter of thread gauges and analysis of influences on the measurement results
T. Primozic Merkac et al.
MEASUREMENT (2010)
An uncertainty analysis of tool setting methods for a precision lathe with a B-axis rotary table
Matthew J. Bono et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2010)
Design and characterization of MIKES metrological atomic force microscope
V. Korpelainen et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2010)
Uncertainty analysis of point-by-point sampling complex surfaces using touch probe CMMs DOE for complex surfaces verification with CMM
Emanuele Modesto Barini et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2010)
Improvement and uncertainty evaluation of mercury sealed piston prover using laser interferometer
H. M. Choi et al.
FLOW MEASUREMENT AND INSTRUMENTATION (2009)
A new calibration facility for water flowrate at high Reynolds number
Noriyuki Furuichi et al.
FLOW MEASUREMENT AND INSTRUMENTATION (2009)
The Construction of Random-Fuzzy Variables From the Available Relevant Metrological Information
Alessandro Ferrero et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2009)
Noise Temperature and Uncertainty Evaluation of a Cryogenic Noise Source by a Sliding Short Method
Hitoshi Iida et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2009)
A t-Norm-Based Fuzzy Approach to the Estimation of Measurement Uncertainty
Claudio De Capua et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2009)
Uncertainty in Power System State Variables Obtained Through Synchronized Measurements
Saikat Chakrabarti et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2009)
An Adaptive Quality Assessment System-Aspect of Human Factor and Measurement Uncertainty
Jenny Wirandi et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2009)
Uncertainty and Worst-Case Analysis in Electrical Measurements Using Polynomial Chaos Theory
Anton H. C. Smith et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2009)
Calculation of Pulse Parameters and Propagation of Uncertainty
Paul D. Hale et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2009)
Measurement and Uncertainty Analysis of Free-Space Antenna Factors of a Log-Periodic Antenna Using Time-Domain Techniques
Satoru Kurokawa et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2009)
Overall Uncertainty Estimation in Multiple Narrow-Band In Situ Electromagnetic Field Measurements
Dimitrios I. Stratakis et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2009)
A fuzzy state estimator based on uncertain measurements
A. K. Al-Othman
MEASUREMENT (2009)
Implementation uncertainty evaluation of cylindricity errors based on geometrical product specification (GPS)
Jian Mao et al.
MEASUREMENT (2009)
Metrological management of the high dc resistance scale at INRIM
F. Galliana et al.
MEASUREMENT (2009)
Uncertainty analysis of cylindricity measurements using bootstrap method
Sami A. Farooqui et al.
MEASUREMENT (2009)
Evaluation and management procedure of measurement uncertainty in new generation geometrical product specification (GPS)
Peng Heping et al.
MEASUREMENT (2009)
Measurability conditions of the signal parameter for a given prior knowledge
Grzegorz Smolalski
MEASUREMENT (2009)
Complex S-parameter measurement and its uncertainty evaluation on a vector network analyzer
Kamlesh Patel et al.
MEASUREMENT (2009)
Measurement of active power by time domain digital signal processing
Martin Novotny et al.
MEASUREMENT (2009)
Paradigms for uncertainty treatments: A comparative analysis with application to measurement
Giampaolo E. D'Errico
MEASUREMENT (2009)
Comparison of measurements in co-ordinate metrology
Alistair B. Forbes et al.
MEASUREMENT (2009)
Traceability enhancement in angle measurements
Vytautas Giniotis et al.
MEASUREMENT (2009)
Traceability of electrical quantities obtained by sampling
Umberto Pogliano
MEASUREMENT (2009)
Traceability and uncertainty analysis in volume measurements
S. Lorefice
MEASUREMENT (2009)
On the degree of objectivity of uncertainty evaluation in metrology and testing
Franco Pavese
MEASUREMENT (2009)
Calibration of low frequency magnetic field meters using a Helmholtz coil
Celso Fabricio de Melo et al.
MEASUREMENT (2009)
Uncertainty of measurement by Monte-Carlo simulation and metrological reliability in the evaluation of electric variables of PEMFC and SOFC fuel cells
Sergio P. Oliveira et al.
MEASUREMENT (2009)
Machine tool calibration: Geometric test uncertainty depends on machine tool performance
B. Bringmann et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2009)
High-accuracy displacement metrology and control using a dual Fabry-Perot cavity with an optical frequency comb generator
Youichi Bitou
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2009)
Calibration of a 3D-ball plate
T. Liebrich et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2009)
Parameter Sensitivity, and Measurement Uncertainty Propagation in Torque-Estimation Algorithms for Induction Machines
Cindy Bastiaensen et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2008)
Uncertainty estimation in simultaneous measurements of levels and permittivities of liquids using TDR technique
Andrea Cataldo et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2008)
Some LMS-based algorithms for impedance measurements
J. Augustyn
MEASUREMENT (2008)
Propagation of uncertainty: Expressions of second and third order uncertainty with third and fourth moments
S. Mekid et al.
MEASUREMENT (2008)
An evaluation of performance limits in continuous TDR monitoring of permittivity and levels of liquid materials
A. Cataldo et al.
MEASUREMENT (2008)
An alternative approach to measurement based on quantile functions
D. A. Lampasi
MEASUREMENT (2008)
Optimal estimation of the relevant information coming from a rollover sensor placed in a car under performance tests
Wilmar Hernandez
MEASUREMENT (2008)
Uncertainty evaluation in dithered ADC-based instruments
Filippo Attivissimo et al.
MEASUREMENT (2008)
Development of a microscopic computer aided measurement system and its uncertainty
E. S. Gadelmawla
MEASUREMENT (2008)
Variability sources of DC voltage-current measurements in the study of TiO2-based varistors
M. A. A. Santana et al.
MEASUREMENT (2008)
Grey bootstrap method of evaluation of uncertainty in dynamic measurement
Xia Xintao et al.
MEASUREMENT (2008)
Measuring electric power quality: Problems and perspectives
Alessandro Ferrero
MEASUREMENT (2008)
Alignment uncertainties in ideal indentation styli
J. D. Ellis et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2008)
An international length comparison using vacuum comparators and a photoelectric incremental encoder as transfer standard
I. Tiemann et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2008)
Measurement procedures and uncertainty evaluation for electromagnetic radiated emissions from large-power electrical machinery
Andrea Mariscotti
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2007)
Modelling accelerometers for transient signals using calibration measurements upon sinusoidal excitation
A. Link et al.
MEASUREMENT (2007)
Measurement uncertainty of torque measurements with rotating torque transducers in power test stands
Georg Wegener et al.
MEASUREMENT (2007)
An improved method for the evaluation of uncertainty of channel power measurement with a spectrum analyzer
Matteo Bertocco et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2007)
A smart THD meter performing an original uncertainty evaluation procedure
Claudio De Capua et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2007)
Uncertainty evaluation of humidity sensors calibrated by saturated salt solutions
Tzehung Lu et al.
MEASUREMENT (2007)
New approach to uncertainty evaluation in the calibration of gauge block comparators
A. Godina et al.
MEASUREMENT (2007)
An image analysis technique for the study of gas-liquid slug flow along vertical pipes - associated uncertainty
T. S. Mayor et al.
FLOW MEASUREMENT AND INSTRUMENTATION (2007)
Measurement uncertainty in power splitter effective source match
Klas Yhland et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2007)
Calibration of micropipettes: Test methods and uncertainty analysis
E. Batista et al.
MEASUREMENT (2007)
Design and analysis of experiments in CMM measurement uncertainty study
Chang-Xue Jack Feng et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2007)
The use of metrological terms and SI units in environmental guides and international standards
Oleh Velychko et al.
MEASUREMENT (2007)
Evaluation of parameter effects in estimating non-linear uncertainty propagation
McKenna L. Roberts et al.
MEASUREMENT (2007)
A generalized confidence interval for a measurand in the presence of type-A and type-B uncertainties
C. M. Wang et al.
MEASUREMENT (2006)
Optimised measurement uncertainty and decision-making when sampling by variables or by attribute
Leslie R. Pendrill
MEASUREMENT (2006)
Measurement uncertainty and optimized conformance assessment
Alistair B. Forbes
MEASUREMENT (2006)
Road map for measurement uncertainty evaluation
Michele Desenfant et al.
MEASUREMENT (2006)
Modeling ADC nonlinearity in Monte Carlo procedures for uncertainty estimation
Nicola Locci et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2006)
Uncertainty and traceable calibration - how modern measurement concepts improve product quality in process industry
Jenny Wirandi et al.
MEASUREMENT (2006)
Suppression of low-frequency interferences in the induction sensor of magnetic field
Rostyslav Sklyar
MEASUREMENT (2006)
Generalized lambda distribution for the expression of measurement uncertainty
Domenico Alessandro Lampasi et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2006)
Characterisation of frequency instability and frequency offset using instruments with incomplete data sheets
Juan Jose Gonzalez de la Rosa et al.
MEASUREMENT (2006)
New proposal for uncertainty evaluation in indirect measurements
Leopoldo Angrisani et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2006)
Fully comprehensive mathematical approach to the expression of uncertainty in measurement
A Ferrero et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2006)
Unscented transform: A powerful tool for measurement uncertainty evaluation
Leopoldo Angrisani et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2006)
An experimental comparison in the uncertainty estimation affecting wavelet-based signal analysis by means of the IEC-ISO guide and the random-fuzzy approaches
S Salicone et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2006)
A polynomial chaos approach to measurement uncertainty
Teems E. Lovett et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2006)
Problem of applying modern uncertainty concepts to the measurement of instrument-specific parameters
J Wirandi et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2006)
Evaluation of the uncertainties in the measurement of distorted power by means of the IEN sampling system
U Pogliano
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2006)
Uncertainty specification for data acquisition (DAQ) devices
DW Braudaway
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2006)
A probabilistic approach to measurement-based decisions
GB Rossi et al.
MEASUREMENT (2006)
Reliability of parameters of associated base straight line in step height samples: Uncertainty evaluation in step height measurements using nanometrological AFM
I Misumi et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2006)
Uncertainty propagation in the discrete-time wavelet transform
L Peretto et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2005)
On measurement uncertainty of a vortex flowmeter
JJ Miau et al.
FLOW MEASUREMENT AND INSTRUMENTATION (2005)
The problem of foundations of measurement
L Mari
MEASUREMENT (2005)
Propagating uncertainty in instrumentation systems
BD Hall
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2005)
On uncertainty in wavelet-based signal analysis
L Peretto et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2005)
A comparative analysis of the statistical and random-fuzzy approaches in the expression of uncertainty in measurement
A Ferrero et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2005)
The use of random-fuzzy variables for the implementation of decision rules in the presence of measurement uncertainty
A Ferrero et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2005)
A united interpretation of different uncertainty intervals
R Willink et al.
MEASUREMENT (2005)
The positioning influence of dial gauges on their calibration results
M Kobayoshi et al.
MEASUREMENT (2005)
Uncertainty evaluation of a broadband attenuation standard
JG Lee et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2005)
Traceable calibration of transfer standards for scanning probe microscopy
J Haycocks et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2005)
Calibration of electronic levels using a special sine bar
B Acko
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2005)
Rounding of measurement values or derived values
PT Wilrich
MEASUREMENT (2005)
Uncertainty analysis of positional deviations of CNC machine tools
I Lira et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2004)
A method of approximation of the coverage factor in calibration
P Fotowicz
MEASUREMENT (2004)
Measurement data processing using random matrices: A generalized formula for the propagation of uncertainty
G D'Antona
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2004)
A method based on random-fuzzy variables for online estimation of the measurement uncertainty of DSP-based instruments
A Ferrero et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2004)
The random-fuzzy variables: A new approach to the expression of uncertainty in measurement
A Ferrero et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2004)
Standard uncertainty evaluation in image-based measurements
M De Santo et al.
MEASUREMENT (2004)
Uncertainty and indeterminacy of measurement data
V Giniotis et al.
MEASUREMENT (2004)
Uncertainty evaluation in algorithms with conditional statement
G Betta et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2004)
Auto-evaluation of the uncertainty in virtual instruments
E Ghiani et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2004)
Aide in decision-making: contribution to uncertainties in three-dimensional measurement
J Bachmann et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2004)
Measurement models: application of intelligent methods
L Reznik et al.
MEASUREMENT (2004)
Evaluation of the uncertainty of an optical machine with a vision system for contact-less three-dimensional measurement
A Lazzari et al.
MEASUREMENT (2004)
Evaluation of uncertainty in measurements - problems and tools
HJ von Martens
OPTICS AND LASERS IN ENGINEERING (2002)
A fuzzy approach for the expression of uncertainty in measurement
G Mauris et al.
MEASUREMENT (2001)