Journal
HYDROMETALLURGY
Volume 104, Issue 2, Pages 260-267Publisher
ELSEVIER
DOI: 10.1016/j.hydromet.2010.06.014
Keywords
Limonitic laterite; Ammoniacal leach; Nickel extraction; Cobalt extraction
Categories
Ask authors/readers for more resources
The leaching of a limonitic laterite (containing approximately 1% Ni, 0.1% Co and 50% Fe) was studied in ammoniacal solution. The laterite was leached in the presence of metallic iron which acted as a reductant. The kinetic parameters studied included the effect of temperature, metallic iron concentration, total ammonia concentration and ammonium sulphate to ammonium hydroxide ratios. Tests were performed in a batch cell with temperature ranging from 50 to 80 degrees C at atmospheric pressure. The kinetic behavior for nickel and cobalt extraction was observed to be different. Cobalt extraction was initially faster than nickel and it showed good extractions at lower temperatures, however, after reaching a maximum value of approximately 80%, extraction decayed by as much as 50%. This was likely due to cobalt co-precipitation and/or adsorption into iron and/or manganese oxides and hydroxides which could form during the process. Cobalt losses tended to increase with temperature, total ammonia concentration, ammonium hydroxide to ammonium sulphate ratio and metallic iron concentration. Nickel extraction was increased by higher temperature, total ammonia concentration and metallic iron concentration up to a maximum of roughly 70% after 48 h at 80 degrees C. Through feed and solid residue analysis, by X-ray diffraction and SEM, it was possible to characterize and understand how the feed mineral reduction occurred. The main phases present in the feed and residue were goethite and magnetite, respectively. Results suggest that the reduction occurs through two main reactions. First, the reaction between goethite and metallic iron produced Fe(II) ammines. The Fe(II) ammines are capable of reducing goethite and producing magnetite. The Fe(II) ammines play an important role because they accelerate the reduction and favor the extraction kinetics of nickel. The main advantage of using metallic iron as a reducing agent is the possibility of generating an autocatalytic system. (C) 2010 Elsevier B.V. All rights reserved.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available